Our blog

  • [SHAULA-791] Basic Manual

    by 0 Comments

    INTRODUCTION

    SHAULA-791 is a GSM gateway that can provide SMS and Call features for different Alarm systems. The features and functions may vary with firmware versions slightly but in general they are consistent. SHAULA-791 replaces SHAULA-V10. Below is the summary of features.

    • operate gate and door (via two relay on board with C and NC contacts).
    • arm & disarm alarm control panel using the app.
    • make alert calls in case of intrusion alarm, panic alarm or fire alarm.
    • monitor power source, notify by SMS if it goes or when it comes back.
    • monitor backup battery when main power is absent and notify by SMS if battery is low or about to die.

  • [SHAULA-V10] Basic Manual

    by 0 Comments

    INTRODUCTION

    SHAULA-V10 is a GSM gateway that can provide SMS and Call features for different Alarm systems. The features and functions may vary with firmware versions slightly but in general they are consistent. Below is the summary of features.

    • operate gate and door (via two relay on board with C and NC contacts).
    • arm & disarm alarm control panel using the app.
    • make alert calls in case of intrusion alarm, panic alarm or fire alarm.
    • monitor power source notify by SMS if it goes or when it comes back.
    • monitor backup battery when main power is absent and notify by SMS if battery is low.

  • [SHAULA-V9] Basic Interface guide

    by Comments are off

    In this brief post I would explain basics of interfacing  SHAULA-V9 with any compatible security alarm system.  SHAULA -V9 is a GSM/GPRS gateway that works as GSM and SMS gateway for security systems.

    It is designed to be easily interfaced with  a number of alarm security panels for example Pyronix 816 which  I would use in the next post. In this post I would show the Interface of SHULA-V9 , focusing on the V9 ports. Lets start by knowing the different ports.